 |
INTRODUCTION |
The PE jaw crusher is developed and
produced by our company with great concentration and in
combination with the successful experiences in foreign similar
products. Among these products, the large and middle type jaw
crusher is one of knockout products or our company, especially
in the design and production of large jaw crusher, we has
ranked the leading at home and abroad. The jaw crushers mainly
are used for the medium-granularity break of various ores and
large blocks, of which the compressive strength is not more
than 320MPa, with two degrees of rough and fine break. The jaw
crusher series has complete specifications and its feed
granularity is 125mm¡«750mm. It is the best choice among
primary break equipment. The jaw crusher is widely used in
many trades of mine, metallurgy, building material, road,
railway, water conservancy and chemical industry etc.
Main Characters:
The motor transmits power through belt,
drives the moving jaw do periodic motion to the fixed jaw
surround the eccentric shaft. The angle between toggle plate
and moving jaw increases when moving jaw moves up. So the
moving jaw closes to the fixed jaw. The stuff will be crushed
in this process. The angle between toggle plate and moving jaw
decreases when moving jaw moves down, the moving jaw moves
away from fixed jaw by the pulling of rod and spring, the
products such as stone after crushing will be discharged from
the outlet.
High ratio of crushing, homogeneous final
grain size, simple structure, reliable working condition, easy
maintenance, low operating cost
.
¡¡
|
SPECIFICATIONAS | |
|
| Model |
Size of Feeder Opening (mm) |
Max. Feeding Size (mm) |
Capacity (t/h) |
Motor Power (KW) |
Weight (t) |
| PE250¡Á400 |
250¡Á400 |
200 |
5-20 |
15 |
2.8 |
| PE400¡Á600 |
400¡Á600 |
350 |
15-60 |
30 |
6.5 |
| PE500¡Á750 |
500¡Á750 |
425 |
50-100 |
55 |
10.3 |
| PE600¡Á900 |
600¡Á900 |
480 |
60-130 |
75 |
15.5 |
| PEX250¡Á750 |
250¡Á750 |
210 |
10-40 |
22 |
5 |
|
